Design YX-CH-02 · Cat. p.32 · Chandelier

Gilded Leaf Canopy

A tapered canopy of cast brass leaves, lit from inside and assembled in sections on site.

Overview

Gilded Leaf Canopy, made to the room

Gilded Leaf Canopy is built from cast brass leaves, each finished by hand and set at a slight angle so the surface catches light unevenly. That irregularity is deliberate. A perfectly uniform drum reads as sheet metal, while leaves let the fixture shift as guests move beneath it.

The canopy tapers from a narrow crown to a wide skirt, and both ends are adjustable. The same design can sit under a coffered lobby ceiling or hang through a stair void without looking stretched or compressed.

Where it belongs

Hotel arrivals, villa dining rooms and stairwells where a warm metal presence suits the interior.

Built to your ceiling

Crown diameter, skirt diameter, overall drop and leaf count are all set from your plan.

Materials and finish

Cast brass in polished, antique or brushed bronze, with warm LED concealed inside the canopy.

Customisation

What can change, and what stays fixed

Every dimension below is drawn from your ceiling and the furniture under it. Nothing is cut until the drawing is approved.

  • Leaf size and spacing adjusted for the viewing distance below
  • Canopy profile changed from shallow bowl to deep cone
  • Service access hatches worked into the crown for lamp changes
Order path

Three approvals before production

Send the room type, ceiling height, plan size and quantity. A sketch or reference photo is enough for the first proposal.

The drawing and 3D view come back for approval, followed by the material and finish sample. Production starts only after both are signed off.

Send the room, not a brief

Ceiling height, plan or opening size, quantity and target date are enough to start. Attach a photo if you have one.

Request YX-CH-02 Gilded Leaf Canopy